Fresno’s XPEL Certified Installer Premium Paint Protection Film, Ceramic Coating & Window Tint

There are four standard percentage options — 50%, 35%, 20%, and 5%.

Each state has their own tinting laws. If you’re interested in having window tinting applied to your car, consider the laws of the state you live in.

The less, the better. Use a soft microfiber cloth and avoid harsh cleaners.

Window tinting in Fresno typically ranges from $199 to $699, depending on the type of film, the number of windows, and the vehicle size. Basic dye-based tints sit at the lower end. At the same time, premium ceramic films like XPEL PRIME XR and XR PLUS cost more because they deliver significantly better heat rejection and longevity. We provide free quotes based on your specific vehicle and the film you choose. Pricing is always straightforward with no hidden fees. For most sedans, a full ceramic tint job falls in the $350 to $550 range.

California law allows 70% VLT (visible light transmission) on the front side windows, meaning the film can only block 30% of light. There is no VLT restriction on the rear side windows or the back windshield, so those can be tinted as dark as you want, including 5% limo tint. The front windshield allows a non-reflective tint strip only on the top 4 inches. We help every customer choose a setup that maximizes heat rejection and privacy within legal limits, so you don’t have to deal with fix-it tickets after install.

We offer a full range of VLT options across the XPEL PRIME film line: 5%, 15%, 20%, 30%, 35%, 50%, and 70%. Most Fresno customers go with 70% ceramic on the front side windows to stay legal while still getting serious heat rejection, and 15% or 20% on the rear windows for privacy and a clean look. The beauty of XPEL’s ceramic technology is that even the lighter shades reject a significant amount of infrared heat. A 70% ceramic film outperforms a cheap 5% dye film on actual heat rejection every time.

Most vehicles take between two and four hours for a full tint job. A standard sedan with all side windows and the rear windshield typically runs about two to three hours. Larger vehicles, like SUVs and trucks with additional rear windows, can take closer to 4 hours. We don’t rush installs; every edge is precision cut, and the film is allowed to set properly before your vehicle leaves the shop. We recommend leaving your windows up for 48 to 72 hours after installation to allow the adhesive to fully cure, which is especially fast in Fresno’s warm, dry climate.

In most climates, ceramic tint is a nice upgrade. In Fresno, it’s practically a necessity. When your vehicle sits in 105°F heat for 8 hours in a parking lot, the difference between dye-based and ceramic films is dramatic. XPEL PRIME XR PLUS rejects up to 98% of infrared heat, which means your cabin stays significantly cooler, your A/C recovers faster, and your interior isn’t being slowly cooked by the sun every day from May through October. Over the life of the vehicle, the reduced A/C strain alone offsets the upfront cost difference, and the film won’t be purple or bubble like cheaper alternatives will after a year or two in this climate.

For the first week after installation, avoid rolling your windows down and don’t clean the interior glass surface. You may notice small water bubbles or a slightly hazy appearance during the curing period. This is normal and will clear up within a few days to a couple of weeks, depending on conditions. Fresno’s heat and low humidity actually speed up the curing process considerably compared to coastal climates. After the film has cured, clean with a soft microfiber cloth and an ammonia-free glass cleaner; avoid abrasive pads or any cleaner containing ammonia, as these can break down the film over time.

This is one of the most common concerns we hear, and the answer depends entirely on the shade and film quality. On the front side windows, California’s 70% VLT requirement ensures minimal impact on nighttime visibility; most drivers don’t notice any difference. On the rear windows, darker shades like 15% or 20% will reduce visibility through those windows at night. Still, since you primarily rely on your side mirrors and rearview camera for rear visibility, most customers find it’s not an issue. High-quality ceramic films like XPEL PRIME also maintain better optical clarity than cheap dye films, which tend to develop haze that can genuinely hurt night visibility as they age.

Yes, and this is one of the most underrated reasons to tint, especially in Fresno’s climate. XPEL PRIME ceramic films block over 99% of UVA and UVB rays regardless of the shade. Even a nearly clear 70% film on your front windows provides full UV protection. Considering that the Skin Cancer Foundation recognizes window film as a recommended UV protectant and that Fresno averages over 260 sunny days per year, tinting is one of the simplest things you can do to protect both your skin and your vehicle’s interior from cumulative sun damage.

Every XPEL PRIME window film installation we perform comes with XPEL’s manufacturer warranty, which covers defects in the film, including bubbling, peeling, cracking, and discoloration. Because we’re an XPEL-certified installer, your warranty is backed directly by XPEL, not just our shop. This means if you move out of the area, any authorized XPEL dealer can honor your warranty claim. We also stand behind our installation workmanship. If anything related to how the film was applied doesn’t meet standards, we’ll make it right.

Absolutely. Old, bubbling, purple tint is one of the most common things we see, especially on used vehicles that had cheap film installed years ago. We handle full tint removal before any new installation. The process involves carefully removing the old film and all adhesive residue without damaging your defroster lines or glass. Removal adds some time and cost to the appointment, depending on how badly the old film has deteriorated, but it’s essential for a clean new install. If you’re not sure whether your current tint needs replacing, bring the vehicle by, and we’ll take a look at it for no charge.

XPEL is one of the most respected names in automotive protection for a reason. Their PRIME XR and XR PLUS ceramic films consistently outperform competitors in independent heat rejection testing, optical clarity, and long-term durability. The films use nano-ceramic particle technology rather than dye or metallic layers, which means no signal interference with GPS, Bluetooth, or satellite radio, a real issue with older metallic films. XPEL also backs its products with strong manufacturer warranties through its certified dealer network. As a certified installer, we have direct access to XPEL’s full product line and technical support, which means your installation meets factory specifications.

We tint Teslas regularly: Model 3, Model Y, Model S, and Model X. EVs are among the best candidates for ceramic window tint because reducing cabin heat means less strain on the climate control system, which directly preserves battery range. Tesla’s large glass roof panels on the Model 3 and Model Y let in significant amounts of heat and UV, even with the factory coating, and adding XPEL PRIME XR PLUS to the roof glass makes a noticeable difference in cabin comfort. We’re familiar with the specific glass dimensions and installation requirements for every current Tesla model, so the fit is precise, and the result is clean.